Monday, May 21, 2012

Car caddy take 2!


I'm finally revisiting the car caddy I made for the roadtrip series I did.  At my initial attempt, I used a tutorial I found online and had fun making it, but it really didn't serve the purpose I had intended.  So I completely revamped it and am much happier with the results!  I put together this tutorial so you can give it a try for yourself.

You're gonna need:
1 yard of non-directional decor weight fabric (note: if you want to use quilting cotton you'll just need to back it with a fusible web so that it's more ridgid)
1 package of double fold bias tape
49" of elastic
1/2 yard belt strap
and a buckle

Cut 
2 13''x23" rectangles for the front and back of the caddy. 
3 pieces for the pockets - 13"x8", 13"x16", and 17"x10" 
3 lengths of double fold bias tape - 2 13" pieces and 1 17" piece
1 13" piece of elastic and 1 36" piece of elastic
1 5" piece of belt strap and 1 13" piece of belt strap

Fold
Make the pockets by folding and pressing the 3 pocket pieces in half so that you have 2 13" wide rectangles (one is 4" tall and the other is 8" tall) and 1 17" wide by 5" tall rectangle.

Sew
Encase the long raw edges of each pocket piece in the double fold bias tape and sew. 



Feed the 13" piece of elastic through the pocket made by attaching the bias tape to the 17" x 5" pocket piece, sewing the ends of the elastic to the ends of the pocket piece. 

Next we'll make a pleat in the 17" wide pocket piece by marking the center with a pin, then measuring 2" out from the center, pinching and bringing that into the center, pin & repeat with the other side of the fabric from center.  Baste the pleat together & remove your pins.




Pin
Place the 13"x23" front rectangle face up.  Pin the 8" tall pocket piece at the bottom - bottom of the pocket piece even with the bottom of the rectangle.

Pin the 5" tall pocket piece (the one you added the elastic and pleat to) 2" above the top of the 8" tall pocket.

Pin the 4" tall pocket piece 2" above the top of the 5" tall pocket piece (you should have approximately 2" left at the top of the rectangle).

Sew
Place the items that you want to store in the caddy on top of the pockets and leaving about a half an inch on each side of the item, mark where the pocket seems should be. 


If you like the placement of mine, you can mark the seems as follows:
For the 4" pocket at the top make 3 pockets approximately 4 1/4" apart.
Leave the 5" pocket open without any additional seems
Make a 9 1/2" pocket in the bottom section

Sew along the bottom of the top two pockets and along your marked lines to create the division in the pockets.

Feed one end of the 5" piece of belt strap through one side of the buckle and sew it closed.  Feed the other end of the 5" piece of the belt strap through the other adjustable side of the buckle, fold the end over on itself and sew to finish the end.

Pin
Align the raw edges of the 36" piece of elastic with the raw edges of the bottom of the front rectangle and pin approximately 1/2" above the bottom of the rectangle. 

Align the raw edges of each of the belt straps (opposite the buckle ends) 2" from the top corners of the front rectangle and pin.


Place the other 13"x23" back rectangle right side down on top of the front rectangle and pin, ensuring the top of each side of each pocket is pinned in place.  You may also want to pin the elastic and the buckle pieces into the center of the rectangle so you don't accidently catch them as you sew.



Sew
With a 1/2" seem allowance, sew all around the rectangle, leaving room at the bottom to turn through.

remove the pins and turn the pieces right side out.

Press all around and sew the opening you turned through shut.

Enjoy
Slide the elastic down over the car seat, buckle the top strap around the head rest and pull tight.  Fill with roadtrip goodies!


 Photobucket

5 comments:

Anonymous said...

How is it that nobody else has left a comment?! This fabric is gorgeous, and I love the finished look of your design. After holding fabric in my stash for many months, I am inspired to take it out and begin! Thank you for sharing this tutorial.

Tiffany Henline said...

Thanks for this easy to follow tutorial! This is is the best one yet!

Michelle and Andy said...

I've looked at a bunch of caddy tutorials, and this one is the best--just what I was looking for! The funny thing is, I saw your first one right away when I looked on pinterest, and thought "I bet she could just add elastic and those box pleats would work great." For some reason this post didn't come up for me until today when I was just looking for photo inspiration on what size of pockets to place on mine. Anyways, I love how you have it finished on the back too, I hadn't thought of doing that. Anyways, it looks very professional, there's no way I would guess you made it. I'm sure mine won't look that nice, mostly because I'm in a hurry. :)

Natalia Hernandez said...

Hi Stacey- thank you for sharing this very clear tutorial!

Araceli Abatidaga said...

I Love it!! I did it for my daughters. You explain it very well. Thanks from Argentina.

Related Posts Plugin for WordPress, Blogger...
 
Simply Yours Designs Cute Blogger Templates